HDPE Piping System

HDPE Pipe Fittings

Overview

Polyethylene(PE) is a sturdy thermoplastic material produced from the polymerization of ethylene and is widely used in water, slurry, and gas applications. Sangir HDPE pipes are manufactured in extrusion sizes ranging from 16 mm to 1200 mm. HDPE Pipes & Fittings are available in rolled coils of various lengths (up to 125 mm OD) or straight lengths up to 12mtrs. HDPE Piping System is available in wide varieties of wall thicknesses but is primarily based on Controlled Outside Diameter (DR). A promising material, it has a design life extended up to 100 years for some applications. Similarly HDPE Pipe is available in many forms and colors, such as the following:
– Single extrusion colored or black pipe.
– Black pipe with coextruded color stripping.
– Black or natural pipes with a coextruded colored layer.

Features
Pipes
Fittings
Technical Information

HDPE
PE 63PE 80
PE 100
Specific Gravity ISO 1183
g/cm³0.95
>0.94
>0.945>0.95
Max. Permissible Service Temperature
⁰C-50 to 90-40 to 50-40 to 50-40 to 50
Tensile Strength at Yield (σS)ISO 527Mpa27>19>21>23
Elongation at Break (εR)ISO 527%>600>600>600>600
Impact Strength (an)ISO 179kJ/m2No BreakNBNBNB
Flexural Strength (σB 3,5%)ISO 178Mpa22222220
Modulus of Elasticity (Et)ISO 527Mpa110090010001000
Coef. Of Linear Thermal Expansion (α)DIN 53752 K-1 x 10-41.51.51.51.5
Vicat Softening TemperatureISO306 ⁰C74707274

Video
Play Video