MDPE Pipe and Fittings – Medium Density Polyethylene Piping Systems

Overview

Sangir manufactures high-quality MDPE pipes and MDPE pipe fittings, following top global and Indian standards such as ISO 4427, DIN 8074, EN 12201, IS 4984, IS 14151, and IS 14333. We specialize in PE100-grade pipes, made from strong black composite raw materials that meet strict performance requirements.

PE100 MDPE pipes are stronger than PE80 or PE63, allowing for larger pipe bores at the same pressure. As per ISO 4427, PE100 pipes must pass a 10,000-hour Long Term Hydrostatic Strength (LTHS) test. This ensures they can handle over 10 MPa pressure and last for at least 50 years.

Sangir offers complete MDPE pipe systems, including MDPE gas pipes and pipe fittings. These are ideal for gas distribution, water supply, and industrial applications that demand durability and long-term reliability.

Features
Pipes
Technical Information

PROPERTIES OF PRODUCT STANDARD Data Unit
DENSITYISO – 1183 / ASTM 1505> 0.930g/cc
MELT FLOW RATE (190°c/5 kg)ISO – 1133 / ASTM D 1238<1.4g/10min
HARDNESS ( SHORE-D)ASTM D 2240> 50Shore-D
TENSILE STRENGTH @ YIELDISO – 527 / ASTM D 638 Type-IV≥ 15Mpa
ELONGATION @ BREAKISO – 527 / ASTM D 638 Type-IV≥ 350%
IMPACT STRENGTHDIN 8078/ ISO 179NO BREAKKJ/M2
HYDRO STATIC STRENGTH(800C,4.5Mpa Hoop stress,165 Hrs)DIN EN ISO 1167NO LEAK NOR BURST
LONGITUDINAL HEAT REVERSION(1100C)DIN EN ISO 2505< 3%

 

Q & A

MDPE (Medium-Density Polyethylene) pipe is a durable plastic piping solution used primarily for gas distribution, water supply, and industrial applications. It offers excellent impact resistance, flexibility, and chemical stability, making it suitable for both underground and above-ground use.

 

MDPE pipes have a lower density than HDPE pipes, giving them better flexibility and impact resistance. HDPE pipes are generally used for high-pressure applications, while MDPE pipes are preferred for gas pipelines, water connections, and low-to-medium pressure rating systems.

 

Yes, Sangir manufactures MDPE pipes and fittings as per national and international standards, including IS 4984, IS 14333, ISO 4427, EN 12201, and DIN 8074. These certifications ensure product reliability, safety, and long-term performance.

 

PE100 refers to a high-grade polyethylene material used in MDPE pipe manufacturing. It provides superior strength, better long-term hydrostatic pressure performance, and a minimum 50-year service life. Sangir’s MDPE PE100 pipes are ideal for high-performance requirements.

 

Yes, MDPE pipes are safe for potable water systems. They are non-toxic, corrosion-resistant, and tested for compliance with drinking water standards, making them suitable for municipal and residential water distribution.

 

HDPE Pipes as per ISO 4427 PE63

Standards

  • IS 4984:2016
  • IS 14333:
  • ISO 4427
  • DIN 8074
  • AZ4130

  

Product Range

  • 16-1200mm OD / max PN25
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

HDPE Pipes as per ISO4427 PE 80

Standards

  • IS 4984:2016
  • IS 14333:
  • ISO 4427
  • DIN 8074
  • AZ4130

  

Product Range

  • 20-1600 mm OD / max PN25
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Search for Sangir Products

Moulded Bend 90⁰

Moulded bend 90⁰

Standards

  • Design: DIN 16963/Manufacturers Standard
  • MOC: HDPE
  • Pressure-Temperature Rating: Up to PN 10 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: DIN 16963

  

Range

  • 20-225mm OD / max PN20

  

All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Moulded Tee 90° Butt Fusion

Moulded Tee 90

Standards

  • Design: DIN 16963
  • MOC: HDPE
  • Pressure-Temperature Rating: Up to PN 10 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: DIN 16963

  

Range

  • 20-225mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Stubend Adaptor-Long Neck

Butt fusion long neck stubend

Standards

  • Design: DIN 16963
  • MOC: HDPE
  • Pressure-Temperature Rating: Up to PN 10 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: DIN 16963

  

Range

  • 20-1200mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Stubend Adaptor-Long Spigot

Butt-fusion-long spigot stubend

Standards

  • Design: DIN 16963 PART-4
  • MOC: HDPE (PE100)
  • Pressure-Temperature Rating: Up to PN 16 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: DIN 16963 PART-4/IS 4984 /IS14333/ISO 4427

  

Range

  • 20-1200mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Moulded End Cap

Moulded End cap

Standards

  • Design: Manufacturers Standard
  • MOC: HDPE
  • Pressure-Temperature Rating: Up to PN 10 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: DIN 16963/ IS 8008 / IS 8008 / ISO 4427 / SPPL STD

Range

  • 20-1000mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Moulded Concentric Reducer

Moulded Concentric Reducer

Standards

  • Design: DIN16963 / MFR STD
  • MOC: HDPE (PE100)
  • Pressure-Temperature Rating: Up to PN 12.5 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: DIN 16963/ IS8008

  

Range

  • 32-630mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Bend 90°

Standards

  • Design: ISO4427-3
  • MOC: HDPE PE100 (ISO 4427-2)
  • Pressure-Temperature Rating: PN4 to PN20 (SDR21 to SDR7.4)
  • End Preparation: Plain Ends
  • Test Method: ISO4427-3 / ISO 4427-2

Range

  • 110-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Bend 60°

Standards

  • IS 4984:2016
  • IS 14333:
  • ISO 4427
  • DIN 8074
  • AZ4130

  

Range

  • 110-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Bend 45°

Standards

  • Design: ISO4427-3 
  • MOC: HDPE PE100 (ISO 4427-2)
  • Pressure-Temperature Rating: PN4 to PN20 (SDR21 to SDR7.4)
  • End Preparation: Plain Ends
  • Test Method: SO4427-3 / ISO 4427-2

  

Range

  • 110-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Bend 30°

Standards

  • Design: DIN 16963 PART-1
  • MOC: HDPE PE100 (DIN8074/DIN8075)
  • Pressure-Temperature Rating: PN4 to PN20 (SDR21 to SDR7.4)
  • End Preparation: Plain Ends
  • Test Method: DIN16963/DIN8075

  

Range

  • 110-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Bend 22°

Standards

  • Design: Manufacturer’s Standard
  • MOC: HDPE PE100/PE80/PE63 (IS 4984)
  • Pressure-Temperature Rating: PN 2.5 to PN 20
  • End Preparation: Plain Ends
  • Test Method: IS8360/IS4984/IS14333/DIN8075/ISO4427

  

Range

  • 110-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Bend 15°

Standards

  • Design: Manufacturers Standard
  • MOC: HDPE PE100/PE80/PE63 (IS 4984)
  • Pressure-Temperature Rating: PN 2.5 to PN 20
  • End Preparation: Plain Ends
  • Test Method: IS8360/IS4984/IS14333/DIN8075/ISO4427

  

Range

  • 20-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Fabricated Segment Tee Equal

Standards

  • Design: IS 8360 PART 2 
  • MOC: HDPE PE100 (IS 4984)
  • Pressure-Temperature Rating: PN 4 to PN 20
  • End Preparation: Plain Ends
  • Test Method: IS8360 / IS4984/IS14333

  

Range

  • 20-630mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Moulded Backing Flanges Slip-on

Standards

  • Design: DIN 2501
  • MOC: HDPE 
  • Pressure-Temperature Rating: PN 10
  • End Preparation: Plain Ends
  • Test Method: DIN 2501 / DIN 2632/ DIN 2633

  

Range

  • 15-900mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Moulded Backing Flanges Blind

Standards

  • Design: ASA 150 / ANSI B16.5
  • MOC: HDPE 
  • Pressure-Temperature Rating: Up to PN 10 (SDR11)
  • End Preparation: Plain Ends
  • Test Method: ASA 150 / ANSI B16.5 / SPPL STD

  

Range

  • 15-600mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

PE Blind Flanges DIN 2501

Standards

  • Design: DIN 2501
  • MOC: HDPE 
  • Pressure-Temperature Rating: PN 10
  • End Preparation: Plain Ends
  • Test Method: DIN 2501 / DIN 2632/ DIN 2633

  

Range

  • 20-900mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

PE Flanges with Steel Inserts ASA 150

Standards

  • Design: ASA 150 / ANSI B16.5
  • MOC: HDPE 
  • Pressure-Temperature Rating: Up to PN 16 (SDR9)
  • End Preparation: Plain Ends
  • Test Method: ASA 150 / ANSI B16.5 / SPPL STD

Range

  • 20-800mm OD / max PN20
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks

Double Side Caps Elbow

Standards

  • EN 1555 | ISO 17885 | ISO 4427 Part 2
  • Testing: ISO 3459 | 3501 | 3503
  • MOC : BS 6920

  

Range

  •  
All dimensions are in mm

Download Dimensions

  • Suitable for underground pipes through the adjustment to local ground movement.
  • Impact-resistant and tough
  • Thermal resistant Application possible between -40°C & 80°C.
  • Smooth internal wall Low blockage risk due to low deposit/residue effects
  • Application in open-air unrestricted through coloring with carbon black.
  • Lower cost due to relatively long life.
  • Non-conductive.
  • Suitable for the transport of polluted waste water.
  • No condensation is possible during short periods of cooling.
  • Easy installation using butt-welding and electro-fusion techniques.
  • Environmental friendly.
  • Homogeneous welded joints – Pull tight and leakproof.
  • Prefabrication – Fast and cost-saving installation.
  • Light in weight – Cost saving in transport and handling.
Featured List of Applications
  • Municipal
  • Industrial
  • Marine / Dredging
  • Agriculture
  • Electrical ( Cable Ducting)
  • Infrastructure
  • Geothermal Heating
  • Culverts
  • Float Docks